ManuFx: an end-to-end custom manufacturing platform, Bengaluru, India.

Catalog

Standard metals and chemicals, and custom parts made to your drawings, from ManuFx: each with the standards it is made to, and quoted on request.

Long Steel

  • TMT bars. Ribbed reinforcement steel for RCC work, in Fe 500 to Fe 550D grades conforming to IS 1786. Standards: IS 1786.
  • MS angles. Hot-rolled L-sections with equal or unequal legs, in IS 2062 E250 and E350, galvanised on request. Standards: IS 2062.
  • MS channels. Hot-rolled U-sections in ISMC and allied profiles for load-bearing structural work. Standards: IS 2062.
  • Steel beams. Hot-rolled I- and H-sections (ISMB, NPB, UB, UC and monorail profiles) as primary load-carrying members. Standards: IS 2062.
  • MS pipes & hollow sections. ERW round pipes and square and rectangular hollow sections from HR strip, black or galvanised. Standards: IS 4923, IS 1239.
  • DI pipes. Centrifugally cast ductile iron pressure pipes with cement-mortar lining, classes K7 and K9, for water networks. Standards: IS 8329.

Flat Steel

  • HR coils. Hot-rolled coils conforming to IS 2062, feedstock for pipes, sections and cold rolling. Standards: IS 2062.
  • Plates & mill plates. Heavy flat steel in cut sizes for structural and heavy fabrication. Standards: IS 2062, EN 10025, ASTM A36.
  • CR coils. Cold-rolled and annealed coils to IS 513, in drawing grades CR1 to CR3. Standards: IS 513.
  • GI / GL coils & sheets. Zinc- and aluminium-zinc-coated flat steel in plain, corrugated or zero-spangle forms, graded by coating mass. Standards: IS 277.
  • PPGI / PPGL. Pre-painted galvanised and galvalume coils, coil-coated to a specified paint system and shade. Standards: IS 14246.

Stainless Steel

  • SS coils. 200, 300 and 400 series stainless coils in mill and polished finishes. Standards: ASTM A240.
  • SS sheets & plates. Cut stainless sheets and plates for fabrication and food, dairy and process equipment. Standards: ASTM A240.
  • SS bars. Free-machining, austenitic and ferritic stainless bars, round and hex. Standards: ASTM A276.

Aluminium

  • Aluminium ingots. Cast aluminium supplied as T-bars, sows and standard ingots, EC and commercial grades.
  • Aluminium wire rods. EC-grade wire rod for conductor and cable manufacture. Standards: IS 5484.
  • Aluminium extrusions. Mill-finish, anodised or powder-coated extrusions, standard profiles or to your die. Standards: IS 733.

Copper

  • Copper cathodes. Electrolytically refined copper, the raw material for rod, wire and alloy work. Standards: ASTM B115.
  • Copper rods. ETP copper rods for drawing, forging and busbar work. Standards: IS 191.
  • Copper wires & strips. Drawn wire and flat strip for windings, earthing and busbars. Standards: IS 613.

Zinc & Alloys

  • Zinc ingots. Refined zinc in SHG (99.995%), HG and PWG grades for galvanizing and alloying. Standards: IS 209.
  • Zinc alloys & nickel ingots. Die-casting zinc alloys and nickel ingots for alloying and plating.

Bulk Chemicals

  • Methanol. Primary alcohol feedstock supplied in bulk tankers and drums, subject to a verified storage licence. Standards: IMPCA.
  • Toluene. Aromatic hydrocarbon solvent for paints, inks, adhesives and synthesis, subject to end-use documentation.
  • Isopropyl alcohol. Secondary alcohol solvent for pharma, cleaning and coating use, in industrial and IP grades. Standards: IP.
  • Acetic acid. Glacial acetic acid at around 99.8% for ester, PTA and pharmaceutical use.
  • MEG / DEG. Mono- and di-ethylene glycol for polyester, PET, coolant and humectant applications.
  • Ethyl acetate. Fast-evaporating ester solvent in bulk and drums.

Polymers

  • Polypropylene (PP). Homopolymer and copolymer granules for raffia, moulding, film and fibre.
  • Polyethylene (PE). HDPE, LDPE and LLDPE grades for film, moulding and pipe.
  • PVC resin. Suspension, paste and pipe-grade PVC resin.

Bitumen

  • Bulk bitumen. Hot paving-grade bitumen in insulated tankers. Standards: IS 73.
  • Drum bitumen. Paving-grade bitumen in embossed or non-embossed drums. Standards: IS 73.
  • Bitumen emulsions & PMB. Cationic emulsions and polymer- or crumb-rubber-modified bitumen. Standards: IS 8887, IS 15462.

Lubricants

  • Base oils. API Group I, II and III base oils in bulk and drums. Standards: API.
  • Industrial lubricants. Hydraulic, gear and compressor oils and greases for plant maintenance. Standards: ISO 6743.

Coal

  • Thermal coal. Steam coal for boilers and kilns; buyers specify GCV, ash, sulphur and moisture.

Solar mounting & trackers

  • Fixed-Tilt Ground-Mount Structures. Custom fabricated mounting structures for utility and commercial solar installations. Standards: IS 800, IS 4759, IS 2062.
  • Rooftop Mounting Structures. Custom mounting structures for solar modules on metal and RCC roofs. Standards: IS 800.
  • Tracker Torque Tubes. Custom fabricated torque tubes for single-axis solar trackers. Standards: IS 4923, BS EN ISO 1461, EN 10025.
  • Tracker Bearing Housings. Custom bearing housing assemblies that carry the torque tube on solar trackers. Standards: ASTM A36.

Towers & substation steel

  • Lattice Tower Members. Custom fabricated angle members for transmission line towers. Standards: IS 802, IS 2062, IS 4759.
  • Substation Gantries & Equipment Supports. Custom gantry and equipment support structures for substations and switchyards. Standards: IS 802, IS 800, IEC 60909.

Steel sections & purlins

  • Roll-Formed C & Z Purlins. Custom roll-formed purlins and girts for buildings, sheds and solar structures. Standards: IS 811, IS 2062.
  • Structural Hollow Sections. Square, rectangular and circular hollow sections, cut to your lengths. Standards: IS 4923, EN 10025.

Containers & e-houses

  • BESS Container Shells. Custom container shells for battery energy storage systems. Standards: ISO 12944, IS 2062.
  • Prefabricated E-Houses & Control Rooms. Custom prefabricated rooms that house switchgear, control and protection equipment. Standards: ISO 12944.

Enclosures & cabinets

  • Outdoor Electrical Cabinets. Custom single-door outdoor cabinets for electrical and control equipment. Standards: ISO 12944.
  • Double-Door Electrical Cabinets. Custom double-door cabinets for larger switchgear and control assemblies. Standards: ISO 12944.
  • Junction Boxes. Custom junction and terminal boxes in sheet steel or stainless steel. Standards: ISO 12944.
  • Battery Rack Frames. Custom steel rack frames for battery banks and energy storage rooms. Standards: IS 800.
  • Server & Equipment Racks. Custom racks for servers, network and control equipment. Standards: IEC 60297.

Electrical assemblies

  • String Combiner Boxes. Custom DC combiner boxes that collect solar strings ahead of the inverter. Standards: IEC 61439.
  • AC Distribution Boards. Custom low-voltage AC distribution boards for plants and solar projects. Standards: IEC 61439.

Cable trays & management

  • Ladder Cable Trays. Custom ladder-type cable trays with the bends, tees and fittings for your route. Standards: IS 4759, IS 2062.
  • Perforated Cable Trays. Custom perforated cable trays with covers, couplers and hardware. Standards: IS 4759.

Fasteners & hardware

  • Structural Bolt Sets. Bolt, nut and washer sets for steel structures, packed to your structure list. Standards: IS 1367, IS 4759.
  • Foundation Anchor Bolts. Custom anchor bolt assemblies for column, tower and equipment foundations. Standards: ASTM A36, IS 2062.
  • Module Mid & End Clamps. Custom clamps that fix solar modules to mounting rails.

Earthing & lightning protection

  • Copper-Bonded Earth Rods. Copper-bonded steel earth rods with couplers and clamps for your earthing design.
  • GI Earthing Strips & Flats. Galvanized earthing strips and flats, cut or coiled to your earthing layout. Standards: IS 2062, IS 4759.
  • ESE Lightning Arresters & Masts. ESE lightning arresters with masts, sized to the protection radius of your site.

Machined & precision components

  • Weld-Neck & Tower Flanges. Forged flanges and tower rings, machined to your drawing. Standards: EN 10025.
  • Base Plates & Brackets. Custom cut, drilled and machined plates and brackets. Standards: IS 2062, ASTM A36.
  • Machined Structural Fittings & Brackets. Custom precision-machined fittings and brackets for aerospace and defence structures. Standards: AMS 4045, ASTM B209.
  • Arm Links & Structural Machined Parts. Custom machined arm links and structural parts for robots. Standards: ASTM B209.
  • Gearbox & Drive Housings. Custom machined housings for gearboxes and drives, from castings or billet. Standards: IS 1030.
  • Precision Turned & Milled Parts. Custom CNC turned and milled parts, made to your drawing. Standards: ISO 2768.

Precision sheet metal & housings

  • Precision Equipment Housings & Covers. Custom machined or formed housings and covers for sensitive equipment. Standards: MIL-A-8625.
  • Sheet Metal Panels & Skin Assemblies. Custom formed and riveted sheet metal panels and skins. Standards: ASTM B209.

Frames, chassis & automation structures

  • Robot Base Frames & Chassis. Custom welded and machined base frames and chassis for robots and automation. Standards: IS 2062, ISO 3834-2.
  • End Effectors & Gripper Assemblies. Custom end effectors and grippers, built to your design or ours.
  • Tool Frames & Sub-Fab Support Structures. Custom support frames for process tools and sub-fab equipment. Standards: IS 800.
  • Automation Cell Frames & Machine Guarding. Custom cell frames and guarding around machines and robots. Standards: ISO 14120.

Cleanroom & fab infrastructure

  • Cleanroom Walls, Ceiling Grids & Pass-Throughs. Custom cleanroom wall panels, ceiling grids and pass-through boxes. Standards: ISO 14644.
  • Gas & Chemical Distribution Panels. Custom panels that distribute process gases and chemicals. Standards: ASTM A270.

Ground support & handling equipment

  • Ground Support Equipment & Transit Stands. Custom trolleys, cradles and stands for moving and working on equipment. Standards: IS 2062, ISO 12944.

Skids & process modules

  • Inverter & Power Skid Frames. Custom skid frames that carry inverters, transformers and switchgear as one unit. Standards: IS 2062, ISO 12944.
  • Process & Pump Skids. Custom skids with piping, supports and equipment mounts, pressure tested at works. Standards: ISO 12944.
  • CBG Upgrading Skid Frames. Custom skid frames for compressed biogas upgrading units. Standards: IS 2062.

Tanks, vessels & pressure parts

  • Digester Tank Shells. Custom fabricated steel shells for biogas digesters. Standards: IS 2062.
  • Storage Tanks & Buffer Vessels. Custom atmospheric and low-pressure tanks and vessels.
  • Vacuum Chambers & Flange Components. Custom stainless steel vacuum chambers and flanges. Standards: ASTM A240.

Weldments & heavy fabrication

  • Plate Girders & Heavy Weldments. Custom plate girders and heavy welded structures, tested to your quality plan. Standards: IS 800, EN 1090.
  • Machine Bases & Bedplates. Custom welded and machined bases and bedplates for machines. Standards: IS 2062, ISO 3834-2.

Tooling, jigs & fixtures

  • Press Tools & Progressive Dies. Custom press tools and dies, designed, built and tried out for your part.
  • Welding Jigs & Inspection Fixtures. Custom jigs and fixtures that hold and check your parts.

Castings & forgings

  • Sand & Investment Castings. Custom castings in iron and steel, from pattern to machined part. Standards: IS 1030.
  • Open & Closed-Die Forgings. Custom forged flanges, shafts and rings, heat treated and tested. Standards: EN 10222.

Conveyors & material handling

  • Belt Conveyor Structures. Custom steel structures that carry belt conveyors. Standards: IS 11592.
  • Screw Conveyors & Augers. Custom screw conveyors and augers for bulk material.

Pre-engineered buildings

  • Pre-Engineered Buildings. Custom steel buildings for factories, warehouses and sheds. Standards: IS 800, MBMA.
  • Mezzanines & Platforms. Custom bolted mezzanine floors and access platforms. Standards: IS 800.